1. Amandla (t): 0.5 kuya ku-5
2. Isakhiwo esihlangene, kulula ukusifaka
3. Ukunemba okuphezulu okubanzi, ukuzinza okuphezulu
4. Stainless Steel impahla
5. Izinga lokuvikela lifinyelela ku-IP68
6. Ukufakwa kwemojula
1. Izikali ze-Hopper, izikali zethangi
2. Izikali zamabhande, izikali zokupakisha
3. Isiteshi Sokuxuba
4. Ukulawulwa kwesisindo sesithako embonini yamakhemikhali, yokudla, eyekhemisi nezinye
I-SBC cantilever beam load cell, ububanzi obubanzi, ozikhethela ukusuka ku-0.5t kuya ku-5t, isakhiwo esihlangene, ukufakwa kalula, okwenziwe ngensimbi ye-alloy engu-40CrNiMoA, ene-A ebonisa ukuthi iyinsimbi yezinga eliphezulu, kanye nokuqukethwe kokungcola kwalesi sici. izoba ngaphansi kunaleyo ye-40CrNiMo Abanye banokucutshungulwa okuhle, ukuguqulwa okuncane kokucubungula nokumelana nokukhathala okuhle. Izinto zensimbi engagqwali uyazikhethela, isiphetho esisodwa silungisiwe, isiphetho esisodwa siyalayishwa, futhi singasetshenziswa ngokuphindaphinda. Ngezesekeli zokufaka ezihambisanayo, ingasetshenziswa kumabhuloho amancane noma ahlanganiswe abe amamojula azosetshenziswa kumathangi, amathangi nezinye izinto zokusebenza. Inomthamo oqinile wokulayisha we-anti-eccentric.
Imininingwane: | ||
Umthwalo Okaliwe | t | 0.5,1,2,3,5 |
Okuphumayo okulinganiselwe | mV/V | 2.0±0.0050 |
Zero Ibhalansi | %RO | ±1 |
Iphutha Eliphelele | %RO | ±0.02 |
Okungeyona i-linearity | %RO | ±0.02 |
Hystere sis | %RO | ±0.02 |
Ukuphindaphinda | %RO | ±0.02 |
Hlanza ngemva kwemizuzu engu-30 | %RO | ±0.02 |
I-Temp.Range Enxephezelwe | ℃ | -10~+40 |
I-Temp.Range esebenzayo | ℃ | -20~+70 |
I-Temp.effect/10℃ kokuphumayo | %RO/10℃ | ±0.02 |
I-Temp.effect/10℃ kuziro | %RO/10℃ | ±0.02 |
Kunconywe I-Excitation Voltage | I-VDC | 5-12 |
Maximum Excitation Voltage | I-VDC | 5 |
I-impedance yokokufaka | Ω | 380±10 |
Umdanso ophumayo | Ω | 350±5 |
Ukumelana ne-insulation | MΩ | =5000(50VDC) |
Ukugcwala Okuphephile | %RC | 50 |
Ultimate Overload | %RC | 300 |
Okubalulekile | Insimbi engagqwali | |
Izinga lokuvikela | IP68 | |
Ubude bekhebula | m | 0.5-2t:3m,3t-5t:5m |
I-torque yokuqinisa | N·m | 0.5-2t:98N·m,3t-5t:275N·m |
Ikhodi yezintambo | Isibonelo: | Okubomvu:+Mnyama:- |
Sig: | Okuhlaza:+Mhlophe:- |