I-LCF500 FLAT RING Torsion ikhuluma uhlobo lokucindezela umthwalo wokucindezela
Izici
1. Ama-Capacities (kn) 2,5 kuye ku-500
2. Isakhiwo esihlangene, kulula ukuyifaka
3. Ukuphambuka okuphansi kokuphuma okuphezulu
4. Umthamo wokulwa nokuphambuka kuqinile kakhulu
I-5. Ukunemba okuphezulu okuphelele, ukuqina okuphezulu
I-6. I-Anodised Aluminium Alloy, i-Alloy yekhwalithi ephezulu nge-Nickel Plating
7
8. Iphrofayili ephansi, ukuklama okuyindilinga
Izinja
1. Umshini wokuhlola izinto ezibonakalayo
2. Isikali seloli
3. Izinga lesitimela
4. Isikali somhlaba
5. Isilinganiso esikhulu samandla
6. Isikali seHopper, Isikali Samathangi
Ukufanisa
Iseli lomthwalo okhulunywayo yiseli lomthwalo owenziwe ngesakhiwo somzimba esivulekile kanye nokusebenzisa umgomo wokuxineka kwe-shear. Ngoba ukwakheka kwalo kufana nesondo elinamaphiko, libizwa ngokuthi inzwa evulekile, futhi ukuphakama kwalo kuphansi kakhulu, kungabizwa nangokuthi inzwa yephrofayili ephansi. I-LCF500 Law Cell amukela isakhiwo sohlobo lwe-elastomer tension-compression sakhiwo, isigaba esisezingeni eliphansi, idizayini eyindilinga, futhi inezinzuzo zokumelana nomthelela, ukumelana nomthwalo ngokwengxenye. Uhla lokulinganisa lubanzi, kusuka ku-0.25t kuya ku-50t, futhi nakho kungenziwa ngokwezifiso ngokuya ngezidingo zamakhasimende. Okuqukethwe kwenziwa nge-aluminium alloy noma insimbi ye-alloy, ngokunemba okuphelele okuphelele nokuqina okuhle kwesikhathi eside.
Ubukhulu
Amapharamitha
| Ukucacisa | ||
| Umthwalo olinganiselwe | Abangu-2,5,5,10,20,100,250,500 | KN |
| Ukukhishwa okulinganiselwe | 2.0 (2.5NK-10NK), 3.0 (25KIN-500KN) | MV / V |
| Ukulingana okungu-zero | ± 1 | % Ro |
| Iphutha eliphelele | ± 0.03 | % Ro |
| Creep (ngemuva kwemizuzu engama-30) | ± 0.03 | % Ro |
| Okungeyona i-LineARYity | ± 0.03 | % Ro |
| Hysteresis | ± 0.03 | % Ro |
| -Phindaphiwe | ± 0.02 | % Ro |
| Ububanzi bokushisa obujwayelekile bokushisa | -10 ~ + 40 | ℃ |
| Ibanga lokushisa elivumelekile elivumelekile | -20 ~ + 70 | ℃ |
| Umphumela wokushisa kwe-zero point | ± 0.02 | % Ro / 10 ℃ |
| Umphumela wokushisa kokuzwela | ± 0.02 | % Ro / 10 ℃ |
| Kunconywe amandla okuvuselela | 5-12 | I-VDC |
| Ukufakwa kokuvikelwa | 770 ± 10 | Ω |
| Ukukhishwa kwe-Implance | 700 ± 5 | Ω |
| Ukumelana nokufakelwa | ≥5000 (50VDC) | Mp3 Ngqo |
| Ukulayishwa ngokweqile okuphephile | I-150 | % RC |
| Khawulela umthwalo ngokweqile | 300 | % RC |
| Into uqobo lwayo | I-Aluminium (2.5kn-10NK) / Insimbi ye-Alloy (25Ku-500NK) | |
| Isigaba sokuvikelwa | IP65 / IP66 | |
| Ubude bekhebula | I-2.5NK-50KAN: 6M 100KIN-250KIN: 10M 500KIN: 15M | m |
Umthandi
1.Ungalindela isikhathi eside ukuthola izimpahla zami ngemuva kokufaka i-oda?
Isikhathi sethu sokukhiqiza sihlala sihlala ezinsukwini ezingama-7-20 ngemuva kokuqinisekiswa kwesampula yangaphambi kokukhiqizwa.
2.Can ngithola isampula ngaphambi kwe-oda lendawo nokuthi isikhathi esingakanani sesampula?
Yebo, kepha amakhasimende adinga ukukhokha amasampula kanye nezimpahla, isikhathi sokuhola sesampula cishe izinsuku eziyi-7 lapho sithola inkokhelo.
3.Chan wenza ngokwezifiso ukwakheka okuhle kithi?
Yebo, sineqembu eliqeqeshiwe elinolwazi olucebile lwazo zonke izikali zohlobo lwe-CAD.
